EPC7011L7BH – 60 VDC/6 A
Screening Level | Space B |
Configuration | Half Bridge Power Stage |
VDD | 50 V |
IOUT | 6 A |
VBIAS | 12 V |
RDS(on) | 22 mΩ |
Max frequency | 2 MHz |
Input Logic | 3.0 V |
LET | 1000 kRad LET= 84 MeV/mg/cm2 |
Package | L7 AIN Ceramic (6.35 mm x 5.08 mm) |
- 50 VDC/6 A Half-Bridge Driver
- 14 mΩ (typ), integrated high-side and low-side eGaN® FETs
- Integrated GaN gate driver and level-shifter
- 12 V external bias supply
- 3.3 V or 5 V CMOS input logic level
- Independent high side and low side control inputs
- Logic Input Shoot-Through Protection, commands both
FETs off when control inputs are both high at same time - Internal Under-Voltage Lockout UVLO) Circuitry
- Synchronous charging for high side bootstrap supply
- Flexible power-sequencing with active gate pull-down
for HS and LS FET allows for VIN before VBIAS power-up - High Speed Switching Capability: 2+ MHz
- Compact AlN Ceramic SMT Package (L7)
- Improved Thermal Conductivity Over Al2O3
- Total Ionizing Dose:
- Rated to 1000 kRAD
- Single Event:
- SEE immunity for LET of 84 MeV/mg/cm2
with VDD up to 100% of Rated Voltage
- SEE immunity for LET of 84 MeV/mg/cm2
-
Neutron Fluence:
- Maintains specification up to 1 x 1015 N/cm2
The EPC Space EPC7011L7BH, is a radiation-hardened, half-bridge GaN power stage. Input logic interface, level shifting, bootstrap charging and gate drive buffer circuits along with eGaN® output FETs configured as a half-bridge, are integrated within a monolithic chip in a custom 7-pin Aluminum Nitride SMT ceramic package. Datasheet parameters are “Post Radiation Effects.” 50 VDC is derated from 80 VDC.
- Single and Multi-Phase Motor Drivers:
- Reaction Wheel Assemblies (RWAs)
- Momentum Wheels
- Robotic Actuators
- Half-Bridge/POL Power Supplies:
- Low Current Single Phase
- High Current Multi-Phase
- Satellite Electrical Power System
Quality Documents
Parts are fully qualified per EPC Space stringent qualification requirements. Reports are available upon request. Please contact [email protected] for further information
Export Classification
ITAR Controlled? No
EAR? Yes
ECCN? 9A515.e
ECCN classification 9A515.e allows for the export of this product to many countries with no license required.
See Supplement No. 1 to Part 738 – Commerce Country Chart for countries with no “X” in column NS2.